Automatic robotic pool cleaning
Smarter cleaning from the pool floor to the waterline
The Hayward SharkVac XL Pilot automatically cleans your pool floor, walls and waterline. Its adaptive cleaning technology calculates the pool’s size and shape to create an efficient cleaning route—with no installation or connection to the pool filtration system required.
- Floor, wall and waterline cleaning
- Adaptive ASCL cleaning programme
- For residential pools up to 6 × 12m
- Easy top-access filter
SharkVac XL Pilot
Intelligent robotic cleaning
Thorough pool cleaning with simple automatic operation
The Hayward SharkVac XL Pilot is designed to clean the pool floor, walls and waterline. Its Adaptive Seek Control Logic — ASCL® microprocessor calculates an efficient cleaning routine based on the size and shape of the individual pool.
No permanent installation or connection to the pool filtration system is required. Place the cleaner in the water, switch it on and allow the automatic programme to complete the selected cleaning cycle.
The Simple Direct Drive design uses non-corrosive bearings for dependable operation. The cleaner is suitable for flat, gently sloping, diamond-shaped and complex pool bottoms across vinyl, shielded PVC, gunite and fibreglass surfaces.
- Floor, wall and waterline cleaning
- Adaptive ASCL® programming
- Short and full cleaning cycles
- No pool-system installation
- Multiple pool-bottom profiles
- Top-access filter cartridge
Simple filter maintenance: remove the patented top-access cartridge and rinse it with a garden hose after use to clear the collected debris.
Performance and specifications
Designed for efficient residential pool cleaning
Key operating information for the Hayward SharkVac XL Pilot, including pool capacity, cleaning performance and electrical specification.
Maximum pool size
6 × 12m
Designed to clean residential swimming pools up to the published maximum size.
Full work cycle
3 hours
Select the full cleaning programme for comprehensive pool coverage.
Flow capacity
22m³/hr
High-volume circulation through the cleaner’s internal filtration system.
Motor unit
24V
Published motor-unit specification of 24 volts and 3.5 amps.
Power cable
16m
Kevlar®-reinforced power cord for the supported residential pool size.
Cleaning control
ASCL®
Adaptive Seek Control Logic calculates an efficient route for the individual pool.
Pool compatibility
Made for different pool shapes and surfaces
The SharkVac XL Pilot can adapt to a range of residential pool-bottom profiles and commonly used pool finishes.
Pool-bottom profiles
- Flat bottom
- Gentle slope
- Diamond shape
- Complex slope
Compatible surfaces
- Vinyl
- Shielded PVC
- Gunite
- Fibreglass
Ergonomic transport trolley included: move and store the cleaner, power unit and cable more conveniently between cleaning cycles.
Simple automatic operation
Place it in the pool and let SharkVac do the work
No permanent installation or connection to the pool filtration system is required. Set up the cleaner, select a cycle and allow the automatic programme to clean the pool.
Position the cleaner
Place the SharkVac XL Pilot into the pool following the supplied operating instructions and allow it to settle correctly in the water.
Select a programme
Choose between the available short or full cleaning cycle according to the level of cleaning required.
Automatic cleaning
ASCL® technology calculates an efficient route while the cleaner works across the pool floor, walls and waterline.
Remove and rinse
Lift out the top-access filter cartridge, remove the collected debris and rinse the filter thoroughly with a garden hose.
Selectable programmes
Choose the cleaning cycle to suit your pool
Select a shorter programme for a quicker clean between standard cycles or use the full programme for more complete pool coverage.
Clean the filter after use
Regularly rinsing the filter cartridge and checking the cleaner, cable and moving components will help maintain reliable cleaning performance.
Product questions
SharkVac XL Pilot questions, answered
Helpful information about pool compatibility, cleaning programmes, operation and routine maintenance.
Which parts of the pool does it clean?
The SharkVac XL Pilot is designed to clean the pool floor, walls and waterline.
What is the maximum supported pool size?
The published specification states that the cleaner is suitable for residential swimming pools measuring up to 6 × 12 metres.
Does it connect to the pool filtration system?
No. The cleaner operates separately from the pool’s filtration system and uses its own internal filter cartridge.
How long is the full cleaning cycle?
The published full work cycle is three hours. A shorter cleaning programme can also be selected when required.
Which pool surfaces are compatible?
Listed compatible surfaces include vinyl, shielded PVC, gunite and fibreglass. Confirm suitability if your pool uses a different or specialist finish.
Can it clean a sloping pool bottom?
The cleaner is listed for flat, gently sloping, diamond-shaped and complex-slope pool bottoms.
How is the filter cleaned?
Remove the patented top-access cartridge, empty the collected debris and rinse the cartridge thoroughly with a garden hose.
Is a transport trolley included?
Yes. An ergonomic trolley is listed as included for easier movement and storage of the cleaner, cable and power equipment.
Not sure whether it suits your pool?
Tell our team your pool size, shape and surface finish before ordering.
Speak to our pool specialists
Is the SharkVac XL Pilot right for your pool?
Tell us your pool’s dimensions, shape and surface finish. Our team will help you confirm compatibility and answer any questions about operation, cleaning cycles and maintenance.
- No-obligation enquiry
- Pool compatibility advice
- Product guidance
Confirm the pool size, shape and surface compatibility before ordering.
